EasyManua.ls Logo

Furuno FELCOM 250

Furuno FELCOM 250
462 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

4.3 Registering the Handset in the SIP Server
4-11
2. Select from the Handset; Settings -> 2. Network -> Password -> 1. Automatic. The
message “Information Set” will be displayed.
The default value is “Automatic,” Make this confirmation on each Handset.
Note)
The default password for the administrator is “01234567.”
Reference)
If you open the “Manual” menu when “Automatic” is selected, “DHCP” will be
selected for both “IP obtain” and “DNS” as shown in the figure below.
Table 4.3.1 The IP address setting on the Handset
Network Menu-1 Menu-2 Menu-3 Setup value
Auto
IP address 192.168.1.xxx
Subnet mask 255.255.255.0
Static IP
Def. gateway 192.168.1.1
IP obtain
DHCP
DNS(Primary) 192.168.1.1
Static
DNS(Secondary)
Manual
DNS
DHCP
DHCP is selected
If you open Manual,

Table of Contents

Other manuals for Furuno FELCOM 250

Related product manuals