Furuno FELCOM 250 Service Manual

 Check List
iii
2.2 Web -> Settings -> Information
Item Checked Note
Baud rate
Settings -> Basic settings ->
GPS
Analog ports: Port1
Analog ports: Port2
Analog ports: Port3
Analog ports: Port4
Settings -> Basic settings ->
Analog port
Ringing pattern
Enabled service
Settings -> Basic settings ->
Incoming indicator
Baud rate
Parity
Flow control
Settings -> Basic settings ->
Serial port
Own IP address
Default: 192.168.1.1
( )
Subnet mask
Default: 255.255.255.0(24)
( )
DHCP
Default: Use
( )
From
Default: 192.168.1.10
( )
To
Default: 192.168.1.254
( )
Settings -> Network settings
-> LAN -> IP address





Static IP address

Open “Lease information” upon
the screen shown above, and the
IP address whose status is set to
“Manual” is the Static IP address.


Furuno FELCOM 250 Specifications

General

Brand	Furuno
Model	FELCOM 250
Category	Marine GPS System
Language	English