Furuno FELCOM 250

 Check List
vi
2.6 Service -> ADE
Item Checked Note
LAN port1
LAN port2
LAN port3
LAN port4
PoE feeding
- Handset:
Approx. 1.7 W (Class-2)
- Incoming IND.:
Approx. 1.2 W (Class-1)
Tx ATT
St-by:
CS call:
Rx ATT
Demodulator gain
Gain & ATT information
TX ATT will vary after being
transmitted.
PLL frequency
Tx PLL status
Rx PLL frequency
Rx PLL status
PLL information
Status is set to Lock.



2.7 Log -> System log
Item Checked Note
Transfer log Enable:
Transfer address
The recommended IP
address for the forwarding
PC is the Static IP address.
Error:
Warning:
Log level
Notice:
System log server
Application:
