AP2.2 SSB Radiotelephone
AP2-10
(4) Selectivity J3E: 2.4 kHz at –6 dB
H3E: 6 kHz at –6 dB
F1B: 0.3 kHz at –6 dB
(5) Spurious Response Better than 90 dB
(6) Intermodulation Better than 94 dB
(7) Audio Output Internal speaker : 2 W/ 8 ohms
External speaker : 4 W/ 4 ohms
Line output: 0 dBm/ 600 ohms
(8) Standard Features Scan, Sweep, Noise Blanker, Voice-activated Squelch
4. ANTENNA COUPLER
(1) Tuning System CPU controlled fully automatic tuning system
(2) Frequency Range 1.6 MHz to 29.9 MHz
(3) Input Impedance 50 ohms (viewed from transceiver)
(4) Antenna 7 m to 18 m wire or whip antenna + wire
(5) Tuning Power 10 W
(6) VSWR Less than 1.5
(7) Tuning Time 0.2 to 2 seconds typical (within 2 to 15 seconds.)
(8) Dummy Load 10 ohms + 250 pF mounted in the coupler
(9) Power Source 18 VDC: supplied from transceiver unit
(10) Antenna BK Relay Internal, optional supply
To Next Page
Loading...
