EasyManua.ls Logo

Furuno RC-1800T - Page 117

Furuno RC-1800T
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AP2.2 SSB Radiotelephone
AP2-12
(4) Selectivity J3E/R3E: 350 Hz to 2700 Hz
H3E: ±3 kHz, A1A/F1B: ±150 Hz
(5) Intermodulation 90 dBµV
(6) Cross Modulation 94 dBµV
(7) Audio Output Internal speaker: 2 W/ 8 ohms
external speaker: 4 W/ 4 ohms
Handset: 10mW/200 ohms
(8) Standard Features Scan, Sweep, Noise Blanker, Voice-activated Squelch
Pre-selector (for MF)
4. ANTENNA COUPLER
(1) Tuning System CPU controlled fully automatic tuning system
(2) Frequency Range 1.6 MHz to 29.9 MHz
(3) Input Impedance 50 ohms (viewed from transceiver)
(4) Antenna 7 m to 18 m wire or whip antenna + wire
(5) Tuning Power 10 W
(6) VSWR Less than 1.5
(7) Tuning Time 0.2 to 2 seconds typical (within 2 to 15 seconds.)
(8) Dummy Load 10 ohms + 250 pF mounted in the coupler
(9) Power Source 18 VDC: supplied from transceiver unit
(10) Antenna BK Relay Internal, optional supply

Table of Contents

Other manuals for Furuno RC-1800T

Related product manuals