AP2.3 DSC/WATCH Receiver
AP2-14
(8) Warming-up Time: 1 minute (oven 30 minutes)
4. MF/HF SSB TRANSCEIVER REMOTE STATION
(1) Line out: 0 dBm, 600 ohms, balanced
(2) Line in: 0 dBm, 600 ohms, balanced
(3) AF input (Microphone): -46 dBm, 600 ohms, unbalanced
(4) AF output (Loudspeaker): 3 W, 4 ohms
(Handset): 1 mW, 200 ohms
5. DISPLAY
(1) LCD Unit: 120 x 64 dots
(2) Characters 20 characters x 8 lines (1 character: 5 x 7 dot) max.
20 characters x 10 lines (1 character: 5 x 5 dot) max.
(3) Back Light: Yellow, 8 tones
(4) Contrast: 64 tones
6. I/O DATA
(1) Nav. Data input: IEC 61162-1, current loop; 1 pair/port
(2) DMC: IEC 61162-1/RS232C or
DMC OUT/IN/CTR H/C; 3 pairs/port
(3) Received Call output: RCV BZ OUT/IN/CTR; 3 pairs/port
(4) NBDP: IEC 61162-1/RS232C
(5) Printer: Centronics (parallel)
(6) RT (MF/HF Transceiver): IEC 61162-1/RS232C,
Line in: 0dBm, 600 ohms,
Line out: 0dBm, 600 ohms,
and other control signals
(7) Power Supply 24 VDC (backed up by battery), less than 24 W
(8) Color Panel: N3.0 (not changeable)
To Next Page
Loading...
