Throttle return
(Amount of throttle return)
Throttle return
Servo travel
* Displays ON/OFF of the condi-
tion that traction control is work-
ing by throttle trigger operation.
The amount of throttle return
varies depending on the curve
setting of the throttle etc.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
100
Function
Traction control
- Delay
6HWWKHGHOD\IURPZKHQWKHWKURWWOHLVRSHUDWHGXQWLOZKHQWKHWUDFWLRQFRQWURORSHUDWLRQ
VWDUWV:KHQVHWWRWKHWUDFWLRQFRQWUROIXQFWLRQZRUNVZLWKRXWGHOD\$WWKHWUDF
-
WLRQFRQWUROIXQFWLRQZRUNVDSSUR[LPDWHO\VHFRQGVODWHUDQGWKHWUDFWLRQFRQWUROIXQF-
WLRQZRUNVDERXWVHFRQGVODWHUDW
- Cycle speed
7KHORZHUWKLVVHWWLQJWKHIDVWHUWKHSXOVHVSHHG6HWYDOXHWKHTXLFNHUWKHSXOVHVSHHG
- Duty ratio
6HWWKHUDWLRRIWKHWLPHWRRSHUDWHWRWKHKLJKVLGHDQGWKHWLPHWRRSHUDWHWRWKHVORZVLGH
in the pumping operation.
7KHUDWLRFDQEHVHWWRaaLQVWHSV
- Trigger point
,QWKHWKURWWOHRSHUDWLRQVHWWKHSRVLWLRQRIWKHWULJJHUDWZKLFK WUDFWLRQ FRQWURO VWDUWV WR
ZRUN1RUPDO5HYHUVHUHYHUVHWKHWKURWWOHRSHUDWLRQUDQJHZKHUHWKHWUDFWLRQFRQWURORSHU
-
DWHVZLWKWKHWULJJHUSRLQWDVWKHERXQGDU\
1
(Function ON/OFF)
Tap "Mixing" (ON) or (OFF) to select ON/
OFF.
"OFF": Traction control function OFF
"ON": Traction control function ON
When using traction control function ON/
OFF by switch, use the switch select func-
tion (page 71) to set the switch to be used.
Traction control function adjustment
2
("Throttle return" amount adjustment)
Tap the value button of the [Brake return]. Value input buttons
appear on the screen. Use the [+] and [-] buttons to adjust
the return amount.
"0": No return
"50": Return to the 50% position of the brake operation amount
"100": Return to the neutral position.
Return amount
0~50~100
Initial value: 50
To Next Page
Loading...
Need help?
General
