FUTABA 7PXR - Page 113

113
Function
Brake Mixing
5
(Steering mixing)
Use this function when you want to soften
the brakes when the steering is operated.
Tap the value button of the "Brake 1 or 2,3"
[Left]. Value input buttons appear on the
screen. Use the [+] and [-] buttons to adjust
the brake amount.
Tap the value button of the "Brake 1 or
2,3"[Right]. Value input buttons appear
on the screen. use the [+] and [-] buttons
to adjust the brake amount. The smaller
the value, the weaker the front brakes. Set
value
"
100" is the state in which steering
mixing is not performed.
- The mixing amount can be adjusted in a range from
0 to 100.
6
When finished, return to the Mixing menu screen by pressing the HOME button twice.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Brake rate (Mixing)
0~100
Initial value: 100
The trim/dial select function can control the brake 1,2,3 rate, delay amount, and EXP
VHWWLQJXVLQJWKHGLJLWDOGLDORUGLJLWDOWULPSDJH
Trim/Dial Setting