*Shows the ON/OFF state
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Idle-up rate
-50~0~+50
Initial value: 0
75
Function
Idle-Up
(Preparation)
- Use the switch setting function to the "Switch
select". (page 71)
When the switch is not set, "A switch is not
assigned" is displayed. Tap [Switch select] to
display the switch selection screen and set the
switch.
Idle-up function adjustment
1
(Idle-up rate)
Tap the rate value button. The value input
button is displayed on the screen, and use
the [+] and [-] buttons to adjust the amount of
the neutral brake rate.
7KHIXQFWLRQVHOHFWGLDOIXQFWLRQFDQFRQWUROWKH,GOHXSUDWHZLWKGLJLWDOGLDORUGLJLWDO
WULPSDJH
Trim/Dial Setting
2
When finished, return to the Linkage menu screen by pressing the HOME button.
To Next Page
Loading...
Need help?
General
