GT7 Terminal
Configuration
www.gantner.com
HB_GT7-2x00-3x00--EN_12
35
- Subnet mask: The static subnet mask of the GT7 terminal for LAN communication.
- Gateway: The static gateway address of the GT7 terminal for LAN communication.
- DNS1: The address of the primary DNS server for LAN communication.
G7 Connect Settings
Figure 5.13 – Device configuration – Page 3
- Address: Define the address of G7 Connect.
- Secure communication: Enable or disable secure communication between the GT7 terminal and G7 Connect.
Time setting of the GT7 Terminal
Figure 5.14 – Device configuration – Page 4
- Date: The date can be manually set here.
- Time: The time can be manually set here.
- Display format: Select between 12h or 24h time format or select “None” to not display the time.
- NTP server: The location of the NTP server from which the time is taken automatically. The default
server is displayed. To change this address, use the web interface, as only numbers
can be entered in the configuration menu on the GT7 terminal.
To Next Page
Loading...
