Garmin TREAD - Enabling Fuel Tracking; Setting a Low Fuel Warning

Title Enabling Fuel Tracking
Identifier GUID-60C599D6-8931-4E48-B9FF-9C65B02EA21A
Language EN-US
Description
Version 5
Revision 4
Changes Updated prereq to indicate Tread usage modes
Status Released
Last Modified 25/11/2020 10:40:39
Author hizerdanielle
Enabling Fuel Tracking
Before you can enable fuel tracking, the device must be in ATV, side-by-side, snowmobile, or motorcycle mode
and placed in the mount.
When you enable fuel tracking, a fuel gauge appears on the trip computer (Viewing the Trip Information Page,
page 46).
1 Fill your fuel tank.
2 Select > Fuel Settings > Fuel Tracking.
3 Select Distance Per Tank.
4 Enter the distance the vehicle travels on a tank of gas and select Done.
Title Setting a Low Fuel Warning
Identifier GUID-FB56B166-950F-4608-97B4-224DDA28B7F5
Language EN-US
Description
Version 3
Revision 4
Changes removed reference to motorcycle mount
Status Released
Last Modified 25/11/2020 11:05:27
Author hizerdanielle
Setting a Low Fuel Warning
You can set the device to warn you when the tank is low on fuel.
NOTE: The device must be connected to the mount to give low fuel warnings.
1 Enable fuel tracking (Enabling Fuel Tracking, page 123).
2 Select Remaining Fuel Warning.
3 Enter a distance, and select Done.
When you have only enough fuel left to travel the distance you entered, a low fuel warning appears on the map
page.
Rider Awareness Features and Alerts 123