Garmin TREAD - Transferring GPX Files from Your Computer; Transferring Data from Your Computer

Title Transferring GPX Files From Your Computer
Identifier GUID-CACE2D6E-A614-4AB9-9924-35BAFDE21913
Language EN-US
Description
Version 1
Revision 9
Changes
Status Released
Last Modified 26/05/2020 14:04:30
Author tillmonmartha
Transferring GPX Files From Your Computer
Apple computers may require additional third-party software, such as Android File Transfer, to read and write
files on this device.
If you have already created routes that you want to use on your device, you can transfer GPX files directly from
your computer.
1 Connect the device to your computer (Connecting the Device to Your Computer, page 162).
The device appears as a portable device.
2 On your computer, open the file browser.
3 Select a GPX file.
4 Select Edit > Copy.
5 Browse to the GPX folder on the device.
6 Select Edit > Paste.
Title Transferring Data From Your Computer
Identifier GUID-D7555914-5660-4CE6-B79F-9BF58B62FFB5
Language EN-US
Description Uicontrols in this topic are not variables because they refer to Windows/Mac strings.
Version 6
Revision 1
Changes No English change. Versioned to fix DA
Status Released
Last Modified 27/04/2021 11:32:11
Author pullins
Transferring Data From Your Computer
1 Connect the device to your computer (Connecting the Device to Your Computer, page 162).
Depending on your computer operating system, the device appears as either a portable device, a removable
drive, or a removable volume.
2 On your computer, open the file browser.
3 Select a file.
4 Select Edit > Copy.
5 Browse to a folder on the device.
NOTE: For a removable drive or volume, you should not place files in the Garmin folder.
6 Select Edit > Paste.
Appendix 163