Garmin TREAD User Manual

Title Mounting the Device
Identifier GUID-CB038326-8EA4-4367-B52B-B7C609DD1EE8
Language EN-US
Description
Version 1
Revision 14
Changes
Status Released
Last Modified 27/07/2020 15:19:00
Author mall
Mounting the Device
Before you can mount the device, you must select a mounting location and purchase the appropriate hardware
for your mounting surface.
NOTICE
Avoid wires, gauges, air bags, air bag covers, HVAC, and other items when drilling pilot holes and attaching the
mount to the vehicle. Garmin is not responsible for any damages or consequences arising from the installation.
1 Place the mount on the selected location.
2 Using the mount as a template, mark the two screw locations .
3 Drill pilot holes (optional).
For some types of mounting material, drilling pilot holes is necessary. Do not drill through the mount.
4 Securely fasten the mount to the surface using the appropriate hardware for your mounting surface.
Appendix 151

Garmin TREAD Specifications

General

Form factor	Fixed
Product color	Black
International Protection (IP) code	IPX7
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Marine (chartplotters, sounders)	No
Live service	-
Storage media type	Flash, Memory card
Compatible memory cards	MicroSD (TransFlash)
Included memory card size	256 GB
Internal storage capacity	64 GB
Battery type	Built-in
Power source type	Battery

Weight and Dimensions

Depth	31 mm
Width	207 mm
Height	169 mm
Weight	246 g