Garmin TREAD - Data Management; About Memory Cards; Connecting the Device to Your Computer

Title About Data Management
Identifier GUID-7F1130A0-4E92-4906-807D-F104D3385FBB
Language EN-US
Description
Version 9
Revision 4
Changes Updating Mac OS version per F96 feedback
Status Released
Last Modified 22/03/2021 16:01:51
Author tillmonmartha
Data Management
The device has a memory card slot for additional data storage.
NOTE: The device is compatible with Windows 7 and newer, and Mac OS 10.7 and newer.
Title About Memory Cards
Identifier GUID-B35D85E8-3C97-423B-BCB6-D681698DF262
Language EN-US
Description
Version 4
Revision 4
Changes Removed the reference to geocaches.
Status Released
Last Modified 16/07/2019 12:47:50
Author mall
About Memory Cards
You can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping
software (www.garmin.com). Memory cards can be used to store files such as maps and custom POIs.
Title Connecting the Device to Your Computer
Identifier GUID-E5BDCF7D-A93B-4007-BDB6-74EE969EBED5
Language EN-US
Description
Version 7
Revision 3
Changes Added the GarminOS condition for Fleet 7x0.
Status Released
Last Modified 07/06/2021 16:06:39
Author petersenj
Connecting the Device to Your Computer
You can connect the device to your computer using a USB cable.
1 Plug the small end of the USB cable into the port on the device.
2 Plug the larger end of the USB cable into a port on your computer.
3 When your Tread device prompts you to enter file transfer mode, select Yes.
A picture of your device connected to a computer appears on the device screen.
Depending on your computer operating system, the device appears as either a portable device, a removable
drive, or a removable volume.
162 Appendix