Garmin TREAD - Planning a Route; Editing and Reordering Locations in a Route

Title Planning a Route
Identifier GUID-84374EC5-29FE-43E3-9BBB-8BBC26F4BBC2
Language EN-US
Description
Version 2
Revision 4
Changes Adding Apps and Create Route to step 1. Spacing issue in the HU,
Status Released
Last Modified 15/10/2021 09:39:51
Author hizerdanielle
Planning a Route
A route can include many locations, and it must include at least a starting location and one destination. The
starting location is the location from which you plan to start your route. If you start navigating the route from a
different location, the device gives you the option to route to your starting location first. For a round trip, the
starting location and final destination can be the same.
1 Select > Route Planner > Create Route.
2 If necessary, select a calculation mode.
NOTE: The Faster Time mode is selected by default.
3 Select an option to choose a location for your starting point:
• Select a location on the map.
• Select , and search for a location (Finding a Location Using the Search Bar, page 102).
4 Repeat step 2 to add more locations.
NOTE: The last location you add is the destination.
5 After you have added all the necessary locations, select .
Title Editing and Reordering Locations in a Route
Identifier GUID-4A47E3B3-E020-4B83-9DE6-59BCDDB62898
Language EN-US
Description
Version 2
Revision 3
Changes Adding Apps to step 1
Status Released
Last Modified 15/10/2021 09:15:57
Author hizerdanielle
Editing and Reordering Locations in a Route
1 Select > Route Planner.
2 Select a saved route.
3 Select List.
4 Select a location.
5 Select an option:
• To move the location up or down, select , and drag the location to a new position in the route.
• To add a new location after the selected location, select .
• To remove the location, select .
Using the Apps 55