Title Calibrating Pitch and Roll
Identifier GUID-2858EE1B-7E27-4B7A-9B96-ED20E0DC7E40
Language EN-US
Description
Version 2
Revision 4
Changes Pitch and Roll is on the home screen for Tread
Status Released
Last Modified 15/10/2021 09:36:26
Author hizerdanielle
Calibrating Pitch and Roll
You can set the angle of your vehicle to zero at any time.
1 Park your vehicle on a flat, level surface.
2 Adjust the position of your device in the mount so you can comfortably view the screen.
3 Select Pitch and Roll > Calibrate.
The values for pitch and roll reset to 0 degrees.
WARNING
To maintain the best accuracy, you must calibrate pitch and roll each time you reposition your device.
Title Adjusting Warning Angles
Identifier GUID-BC162523-3437-4627-83B9-2CA1628A1BFF
Language EN-US
Description
Version 2
Revision 4
Changes Pitch and Roll is on the home screen for tread
Status Released
Last Modified 15/10/2021 09:36:23
Author hizerdanielle
Adjusting Warning Angles
You can adjust the angles at which the device activates a pitch or roll alert. You are responsible for knowing and
setting the correct pitch and roll angle for your vehicle.
1 Select Pitch and Roll > > Warning Angles.
2 Swipe up or down to adjust the pitch or roll warning angles.
3 Select OK.
Off-Road Navigation Features 25
To Next Page
Loading...
