Title Viewing the Collections Map Layer
Identifier GUID-6684C4EC-BF87-4350-9530-770E26FFFD6E
Language EN-US
Description
Version 2
Revision 3
Changes Clarified requirements for new Tread devices.
Status Released
Last Modified 15/10/2021 09:22:15
Author mall
Viewing Your Collections on the Map
Before you can view the Collections map layer, you must pair your device with the Tread app and sync your
device with your Garmin Explore account.
You can view your Garmin Explore collections directly on the map. You must enable the collections map layer to
use this feature.
NOTE: If you do not assign a collection category to your Garmin Explore data, it appears as an unorganized
collection.
1 Select View Map > > Collections.
2 Select one or more collection categories from the list.
3 Select Save.
Your collections appear as icons on the map.
Title Pitch and Roll
Identifier GUID-5EE76399-39B7-45BB-A463-32A2AEDF6D2E
Language EN-US
Description
Version 1
Revision 9
Changes
Status Released
Last Modified 01/04/2019 12:51:29
Author mall
Pitch and Roll
WARNING
The Pitch and Roll application is intended to show vehicle angles based on calibrated measurements only. You
are responsible for calibrating the device. Changes to the position of the device after calibration may affect the
accuracy of its measurements. Measured values are suggestions only based on your input into the device. Take
readings often and carefully, and allow the readings to stabilize after significant changes in environmental
conditions. Always allow a margin of safety for changing conditions and reading errors. Failure to account for
your vehicle and your environment could cause an incident resulting in death or serious injury.
The device alerts you if your vehicle pitches or rolls at an angle that could affect the vehicle's stability.
24 Off-Road Navigation Features
To Next Page
Loading...
