Garmin TREAD - Disconnecting the USB Cable; Adding Basecamp Data to Garmin Explore

Title Disconnecting the USB Cable
Identifier GUID-1DD9FEA0-C047-4250-A6DC-E7DCB8896E40
Language EN-US
Description
Version 3
Revision 4
Changes Apple computer, not Mac.
Status Released
Last Modified 25/10/2016 08:52:58
Author wiederan
Disconnecting the USB Cable
If your device is connected to your computer as a removable drive or volume, you must safely disconnect your
device from your computer to avoid data loss. If your device is connected to your Windows computer as a
portable device, it is not necessary to safely disconnect the device.
1 Complete an action:
• For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your
device.
• For Apple computers, select the device, and select File > Eject.
2 Disconnect the cable from your computer.
Title Adding BaseCamp Data to Garmin Explore
Identifier GUID-BF0DCAAD-2DC1-4B7E-A116-E22E2BBB4E18
Language EN-US
Description
Version 1
Revision 7
Changes
Status Released
Last Modified 02/01/2020 17:19:05
Author tillmonmartha
Adding BaseCamp
™
Data to Garmin Explore
You can export your BaseCamp data files and import them to Garmin Explore for use with your Tread device.
1 Export your data from BaseCamp:
• If you are using an Apple computer, see Exporting Data from BaseCamp with an Apple Computer, page 165.
• If you are using a PC, see Exporting Data from BaseCamp with a PC, page 165.
2 Import your BaseCamp data to the Garmin Explore website (Importing Data to Garmin Explore, page 166).
3 Synchronize your Garmin Explore data with your Tread device (Synchronizing Garmin Explore Account Data,
page 104).
164 Appendix