Title Initiating an SOS Rescue (zumo)
Identifier GUID-2458D81C-9A23-4D0D-875F-57B0A3CBD94C
Language EN-US
Description
Version 3
Revision 4
Changes Updating the warning per Legal
Status Released
Last Modified 15/12/2021 13:41:43
Author hizerdanielle
Initiating an SOS Rescue
Before you can initiate an SOS rescue using your Tread device, you must pair it with a compatible inReach
device (Connecting an inReach Device, page 37).
NOTICE
While the device is in SOS mode, do not turn off or attempt to turn off the inReach device. Doing so could
prevent this feature from operating properly and could delay receipt of assistance in the event of an emergency.
1 Select > inReach.
2 Select .
3 Wait for the SOS countdown.
The device sends a default message to the emergency response service with details about your location.
4 Reply to the confirmation message from the emergency response service.
Your reply lets the emergency response service know that you are capable of interacting with them during
the rescue.
For the first 10 minutes of your rescue, an updated location is sent to the emergency response service every
minute. To conserve battery power after the first 10 minutes, an updated location is sent every 10 minutes
when moving, and every 30 minutes when stationary.
Title Canceling an SOS Rescue (PND)
Identifier GUID-D715382B-1D6B-4D5E-A7BE-ED461C0BDD89
Language EN-US
Description
Version 1
Revision 3
Changes
Status Released
Last Modified 15/10/2021 09:36:29
Author mall
Canceling an SOS Rescue
If you no longer need assistance, you can cancel an SOS rescue after it is sent to the emergency response
service.
Select Cancel SOS > Cancel SOS.
Your device transmits the cancellation request. When you receive a confirmation message from the emergency
response service, the device returns to normal operation.
Off-Road Navigation Features 39
To Next Page
Loading...
