GE Dash 4000 Service Manual

Field replaceable units: Remove or replace handle assembly
7-12 Dash 3000/4000/5000 2000966-542D
 Apply pressure against the antenna cables (to prevent
pulling on the cables) and carefully remove the antenna label
from the antenna cables. Discard the label.
 Remove the wireless card from the PC card bracket by
pressing the CF card eject button. To press the CF card eject
button, carefully insert the flat end of a pen approximately 1-
inch deep and push the CF flash card eject button as shown.
961B
973A
974A
CF card eject button

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available