GE FVP110 - Logical Structure of each Block

FVP 110 Fieldbus Valve Positioner Manual
86
GE Energy
❑ Control signal from an upstream block and pass the
signal to Transducer block.
❑ Valve position signal from Transducer block and
feedbacks it to an upstream block.
❑ DI function block - Receives the discrete signal from
Transducer block and outputs them.
❑ PID function block (optional) - Offers PID control function.
Logical Structure of Each Block
Setting of various parameters, node addresses, and PD Tags shown in Figure 49 is
required before starting operation.
Figure 49 Logical Structure of Each Block