FVP 110 Fieldbus Valve Positioner Manual
18
GE Energy
C) FM Nonincendive approval
Model FVP110 Advanced Valve Positioner with optional code/FN15.
❑ Applicable standard: FM3600, FM3611, FM3810
❑ Nonincendive Approval
Class I, Division 2, Groups A, B, C and D
Class II, Division 2, Groups F and G
Class III, Division 1 and
Class I, Zone 2, Group IIC in Hazardous
(Classified) Locations.
Temperature Class: T4
Ambient Temperature: –40 to 60 °C
Enclosure: NEMA Type4X
❑ Electrical Parameters:
Vmax = 32 Vdc
Ci = 1.76 nF
Li = 0 μH
❑ Caution for FM Nonincendive type. (Following contents refer to DOC. No.
NFM010-A12 p.1 and p.2)
NFM010-A12
Figure 5 Installation Drawing
To Next Page
Loading...