27
Entity Model
Safety
Note 3. Installation
❑ All wiring shall comply with local installation requirements (Figure 8 on page 27).
Note 4. Maintenance and Repair
❑ The instrument modification or parts replacement by other than authorized
representative of GE Masoneilan is prohibited and will void Type of Protection n.
Figure 8 Installation Diagram
(2) Electrical Connection
The type of electrical connection is stamped near the electrical connection port
according to the following marking.
Screw Size Marking
ISO M20X1.5 female
ANSI 1/2 NPT female
To Next Page
Loading...