51
5
Wiring and Piping
General
This section describes the air piping and electric wiring connections.
Cut off all inputs to the valve actuator and other accessories of the valve
and actuator, including the air supply and electric signal before making or
modifying the piping and wiring connections.
The process must be shut down or the control valve isolated from the
process by using bypass valves or the like when making or modifying the
piping and wiring connections.
Always cap the unused wiring ports with blind plugs.
In general, all topics must be completed in the order given:
1. “Piping” on page 52
2. “Wiring” on page 54
3. “Grounding” on page 57
To Next Page
Loading...