49
Mounting the FVP110 with
Installing the FVP110 on the
Mounting the FVP110 with NAMUR Kits
The kit comes complete for mounting to various two valves. The socket head screws
vary depending on the valve.
Tools required:
❑ M4 hex key
❑ M5 hex key
❑ M7 hex key
Refer to Figure 31 for this procedure.
To mount using this kit:
1. Attach the mounting bracket (#5) to the valve actuator using four (4) M8 x 1.25 x 25
flat-head cap screws (# 7).
Figure 31 Namur Mounting Kit
2. Place the indicator disk with metal insert over the valve actuator shaft and secure
using an M6 x 1.0 x 22 socket-head screw (#9).
To Next Page
Loading...