GE ImageQuant LAS 4000 User Manual

Install the USB function driver (Windows Vista)
Note:
During software installations, you may be asked to confirm your actions in a dialog with
the text Windows needs your permission to continue. Enter an administrator password,
if prompted, then click Continue to proceed with the installation.
ActionStep
Connect the computer and the ImageQuant LAS 4000 with a USB cable and turn ON the
power switch of ImageQuant LAS 4000.
1
Result: The scanner will automatically be detected by the computer and the Plug and
Play function in Windows Vista starts.
In the Found New Hardware dialog, select Locate and install driver software (recom-
mended).
2
Insert the ImageQuant LAS 4000 Control Software CD and click the Next button in the
Found New Hardware dialog.
3
Select Install this driver software anyway.4
A successful installation message appears. Click the Close button.5
Install ImageQuant LAS 4000 Control Software
(Windows Vista)
Note:
During software installations, you may be asked to confirm your actions in a dialog with
the text Windows needs your permission to continue. Enter an administrator password,
if prompted, then click Continue to proceed with the installation.
ActionStep
Insert the ImageQuant LAS 4000 Control Software CD.1
Locate and double-click the file ImageQuant LAS 4000.msi.2
In the ImageQuant LAS 4000 - InstallShield Wizard dialog, click the Next button.3
Read the license text. If the license agreement is not acceptable, please contact a GE
Healthcare representative. See the back cover of this manual for contact information.
4
Select I accept the terms in the license agreement and click the Next button.
116 ImageQuant LAS 4000 User Manual 28-9607-42 AB
6 Installing ImageQuant LAS 4000 Control Software
6.3 Install ImageQuant LAS 4000 Control Software under Windows Vista

GE ImageQuant LAS 4000 Specifications

General

Brand	GE
Model	ImageQuant LAS 4000
Category	Laboratory Equipment
Language	English