GE LOGIQ 400 - Page 186

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL

RENEWAL PARTS
6–56
REV 9
OPERATOR CONSOLE ASSY
2127794 – 2127803 : V2.11
2164514 – 2164523 : V3.00
2180828 – 2180837 : V3.10
2212968 – 2212977 : V3.40
2239789, 2239793 – 2239799, 2239804, 2239805 : V4.01
2250251, 2250253 – 2250256, 2250258 – 2250267 : V4.31
2264467 – 2264472, 2264475, 2265935 – 2265941 : V5.01
2197064, 2198442 – 2198445 : LOGIQ 400CL, V3.20
2213911 – 2213915 : LOGIQ 400CL, V3.41
2239832 – 2239836 : LOGIQ 400CL, V4.02
2250270, 2250271, 2255918, 2255919 : LOGIQ 400CL, V4.32
2265944 – 2265947 : LOGIQ 400CL, V5.01
MATERIAL LIST (9/12) (continued)
From software version 4.31
for MD, MR3 or 4.32 for CL.
Old VIPB (2212616) can be
replaced with new VIPB2
(2212616–2)
SECTION
PART NAME PART NO. QTY. DESCRIPTION FOR
REFERENCE
608 DSCC ASSY 2123313–2 1 1 DSCC 6–2–78
DSCC ASSY 2123313–3 1 1 6–2–78
609 VIDO2 ASSY 2117032–2 1 1 6–2–78
VIDO2 ASSY 2117032–3 1 1 For MVME147–010 6–2–78
610 VIPB ASSY P9525VA 1 1 6–2–78
VIPB ASSY 2149141 1 1 For MVME147–010 6–2–78
VIPB2 ASSY 2212616 1 1 6–2–78
VIPB2 ASSY 2212616–2 1 1 6–2–78
VIPP ASSY 2245652 1 1 6–2–78
FRU
NO.
FRU
For color monitor model
without VTR playback
DSCC ASSY is used only for
color monitor model.
Old DSCC (2123313–2) can
be replaced with new DSCC
(2123313–3).
For color monitor model
with VTR playback
available only for console
with software version
3.40B or later for MD con-
sole (3.41B or later for CL
console)
available on console with
software version 5.01 or
later
Note
VIDO2 ASSY, VIPB ASSY and VIDM ASSY are changed with the backward compatibility to corre-
spond to the new OBC ASSY, MVME147–010. With this changes, the part numbers of VIDO2 ASSY,
VIPB ASSY and VIDM ASSY are changed to 2117032–3, 2149141 and 2123337–2 from 2117032–2,
P9525VA and 2123337, respectively. Be sure to use the new Video board to replace the VIDO2 ASSY,
VIPB ASSY or VIDM ASSY installed in the console with the MPU ASSY including the new OBC ASSY,
MVME147–010.