GE LOGIQ 400 - Rotary Encoder (FRU No. 460)

LOGIQ 400 SERVICE MANUALGE MEDICAL SYSTEMS
2127661

RENEWAL PARTS
6–163
REV 9
6–2–60 Rotary Encoder (FRU No. 460)
Time Required
15 Minutes
Tool Required
Screwdriver
Procedure
Refer to ILLUSTRATION 6–83.
Note
The same four rotary encoders are used in the keyboard Panel Assy.
1. Turn OFF the system.
2. Remove the Keyboard Panel Assy. Refer to ILLUSTRATION 6–77 on page 6–155.
3. Unscrew four screws (
1
–
2
).
4. Disconnect the gain encoder connector (
3
).
ROTARY ENCODER DISASSEMBLY
ILLUSTRATION 6–83