GE LOGIQ 400 - Introduction

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL

FUNCTIONAL CHECKS
4–3
REV 2
4–1 INTRODUCTION
This chapter provides procedures for quickly checking major functions of the LOGIQ 400 console, diagnostics by
using the built–in service software, and power supply adjustments.
4–1–1 Required Equipment
To perform these tests, you’ll need any of a sector, linear, or a convex transducer.
Note
The soft menu displayed on the CRT monitor screen disappears automatically by the time set with the
CRT Menu Auto Erase Interval of the System Parameter (page 1/6). When the “Inf” is selected, the
soft menu does not disappear automatically.