GE LOGIQ 400 Service Manual

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL

SYSTEM CONFIGURATION
3–11
REV 9
3–5–2 List of Optional Peripherals
The tables below show the optional connectable peripherals for LOGIQ 400. Proper remote control and image re-
cording when connecting these peripherals to LOGIQ 400, are verified.
1. RECORDING DEVICES
TABLE 3–2
LIST OF RECORDING DEVICES
DEVICE MANUFACTURER MODEL VIDEO SIGNAL
Video Cassette Recorder SONY SVO–9500MD NTSC
SONY SVO–9500MDP PAL
Color Video Printer SONY UP–1850MD NTSC
SONY UP–1850EPM PAL
SONY UP–2950MD NTSC
SONY UP–2850P PAL
SONY UP–2900MD NTSC
SONY UP–2800P PAL
Video Graphic Printer SONY UP890MD NTSC
SONY UP890CE PAL
SONY UP890MDG NTSC/PAL
Note
If the customer need to connect the other peripherals with LOGIQ 400 console, please contact the
address shown in Chapter 1 of this manual.
Note
The “Quaf–Frm” format is available only for the following color printers:
UP–1850MD, UP–1850EPM, UP–2950MD, and UP–2850P
The “Quaf–Frmls” selection for the Color Printer Memory in the SYSTEM PARAMETER SETUP, is
not available for those printers. This function is valid only for the UP–3030MD printer.

GE LOGIQ 400 Specifications

General

Brand	GE
Model	LOGIQ 400
Category	Medical Equipment
Language	English