GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
SYSTEM CONFIGURATION
3–12
REV 9
3–5–2 List of Optional Peripherals (Continued)
2. CONNECTING CABLES
CAUTION
Equipment damage possibility. Be sure to use the following recommended connecting cables
to connect recording devices with LOGIQ 400 console.
TABLE 3–3
LIST OF CONNECTING CABLES
NAME PART NO. FIGURE NOTE
POWER CABLE P9509EE For recording device
P9509LH Used only for installing B/W Video
Printer on front of console
RS232C CABLE P9509MN For control signals
2150410 For Insite connection
MINI PLUG CABLE P9509BE For control signals (used only
for B/W Video Printer)
Ethernet Cable 2195662 For DICOM capability
Included in the DICOM Support
option with Tranceivers
To Next Page
Loading...
