GE LOGIQ 400 - Page 204

GE MEDICAL SYSTEMS LOGIQ 400 SERVICE MANUAL

2127661
RENEWAL PARTS
6–74
REV 9
6–2–2 Monitor Cover Set (FRU No. 101) (continued)
Note
The new Monitor Cover Set (2162082) and Escutcheon Assy (2162083) include the four different la-
bels for the Escutcheon. When replacing the Escutcheon with the new Monitor Cover Set or replacing
the Escutcheon Assy, be sure to attach the proper label on the Escutcheon as follows:
a. Choose the proper label, “LOGIQ 400” or “LOGIQ 400 MD” indicating the same model name as the label on
the removed Escutcheon.
b. Remove the lower pasteboard from the proper label. Refer to ILLUSTRATION 6–16.
REMOVING LOWER PASTEBOARD
ILLUSTRATION 6–16
c. Set and attach the label on the Escutcheon. Adjust the position of the label attached as shown in
ILLUSTRATION 6–17. Be careful not to attach the label with a misalignment.
ATTACHING LABEL
ILLUSTRATION 6–17