GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
RENEWAL PARTS
6–274
REV 9
6–6–4 Procedures (continued)
(C) Installing 3.5–Inch HDD Assy (continued)
Note
When the MODD installed is the type of “2187012–2”, set the DIP switches and the jumper switches
as shown in ILLUSTRATION 6–103.
MODD
(2187012–2)
SETTINGS OF SWITCHES ON MODD
ILLUSTRATION 6–158
27. Connect the CB24N with the MODD Assy. Refer to ILLUSTRATION 6–146 on page 6–265.
28. Screw four screws and install the MODD Cover Metal. Refer to ILLUSTRATION 6–145 on page 6–264.
29. Re-install the Side Cover Right. Refer to 6–2–32 on page 6–128.
30. Re-install the Front Base Cover. Refer to 6–2–35 on page 6–131.
31. Re-install the Keyboard Panel Assy. Refer to 6–2–49 on page 6–147.
32. This completes the Replacing 2.5–inch HDD Assy with 3.5–inch HDD Assy.
To Next Page
Loading...
