GE LOGIQ 400 - Page 496

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
TM
8–58 OPTIONS
REV 5
8–5–8 Operational Check–out (Continued)
4. Display the single B–mode image.
5. Press the Top Menu Select key located on the keyboard. The sub–menu selected previously is displayed on the
CRT monitor screen.
SOFTWARE MENU CONTROL KEYS
ILLUSTRATION 8–63
6. Press the Top Menu Select key again. The top menu is displayed on CRT monitor screen as shown in
ILLUSTRATION 8–64.
TOP MENU
ILLUSTRATION 8–64
7. Select the ECG Menu using the or key of Sub Menu Select keys. The ECG selection is displayed in
reverse video as shown in ILLUSTRATION 8–64.
8. Press key to select the ECG Menu. The ECG Menu is displayed on the CRT monitor screen as shown in
ILLUSTRATION 8–65.
ECG MENU (a)
ILLUSTRATION 8–65