GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
TM
8–76 OPTIONS
REV 5
8–6–9 Final Procedures (Continued)
4. Fill out the proper customer information on the Product Locator Card. Refer to ILLUSTRATION 8–86. Mail this
installation Card “Product Locator” to the address corresponding to your pole.
PRODUCT LOCATOR INSTALLATION CARD
ILLUSTRATION 8–86
Note
The Product Locator Card indicated in ILLUSTRATION 8–86 may be different from the actually pro-
vided one.
5. Properly dispose of excess material.
6. This completes the installation of the Expanded Cine Memory Option for LOGIQ 400.
To Next Page
Loading...
