GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
SYSTEM CONFIGURATION
3–14
REV 9
3–5–2 List of Optional Peripherals (continued)
3. PROBES (Continued)
TABLE 3–5
LIST OF TRANSDUCERS (continued)
PROBE MATERIAL OF AREA OF CATALOG REQUIRED
NAME HEADSHELL USING NO. ADAPTER
LD PES BIOPSY LINEAR PA 51
C358 PES ABDOMINAL CONVEX H45202CD
ERB7 NORYL ENDOCAVITY H40392LC
3S NORYL CARDIOLOGY SECTOR H4550SZ No Needed
TYPE FAMILY PROBES PART No.
P9601AD
2193617
2172443
LINEAR/
CONVEX
2239590
2204232
2252157
Note
PES : Polyethersulfone NORYL : Modified Polyphenylene Oxide PU : Polyurethane
Note
Some probes listed on the table above have two different part numbers. The number of upper row
indicates the part number of probes for the region other than Japan. The number of lower row indi-
cates the part number of probes for Japan.
Probes which have only one part number are not available in Japan.
Note
546L, S317, S611, C386, I739, T739 and LA39 probes are available on LOGIQ 400 console from
software version 3.00.
Note
B510, S222, CWD2 and CWD5 probes are available on LOGIQ 400 console from software version
3.10.
Note
The following probes are not available on LOGIQ 400CL:
S220, B510, CWD2, CWD5, S317, S611, and S222
Note
The LD probe is available only for the Japanese console with the software version 3.40 or later.
Note
The C358 and ERB7 probes are available on LOGIQ 400 console with the software version 4.01 or
later.
Note
The 3S probe is available on LOGIQ 400 console with the software version 5.01 or later.
To Next Page
Loading...
Need help?
General
