GE LOGIQ 400 - Page 90

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL

FUNCTIONAL CHECKS
4–26
REV 9
4–3–3 Utility Menu (continued)
(E) USER OPTION DISPLAY (continued)
Note
The following four (4) options are available only for the console with the software version 3.00 or later:
Item 25: Multigestation calculation
Item 26: Advanced Vascular Calculation
Item 27: CFM/PDI Enhancement
Item 28: MD Startup Display
The item 28, “MD Startup Display” is changed to “CL Startup Display” for the LOGIQ 400CL systems.
Note
The following four (4) options are available only for the console with the software version 3.40 ot later:
Item 29: 3DvieW–1
Item 30: 3DvieW–2
Item 31: Storage/Print (DICOM)
Item 32: Worklist (DICOM)
Note
The following three (3) options are available only for the console with the software version 4.01 ot later:
Item 33: ACE–2
Item 34: Realtime Doppler Calculation
Item 35: MR3 Startup Display
Note
The ATO option (Item# 36) is not available on the console with the software version 4.01 and 4.02.
Note
The following four (4) options are available only for the console with the software version 5.01 ot later:
Item 36: ACE–2
Item 37: Realtime Doppler Calculation
Item 38: MR3 Startup Display
Item 39: CL Startup Display