GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
FUNCTIONAL CHECKS
4–29
REV 5
4–3–3 Utility Menu (Continued)
(H) MODEM SET UP
This displays and changes the current settings for the modem.
Type 8 and then press Return key when the Utility Menu is displayed. The Modem Set Up is displayed as shown
in ILLUSTRATION 4–22.
SOFTWARE CONFIGURATION DISPLAY
ILLUSTRATION 4–22
Procedure for Changing Each Settings
1. Input the item number you desire to change the settings. The choices for the selected item are displayed.
2. Type the appropriate number and press Return.
Note
This function is valid only when the USrobotics modem is selected by the option setting function of the
service software. If the Motolora modem is selected, the message “This function is not available.” is
displayed on the CRT monitor screen.
To Next Page
Loading...
