GE LOGIQ 400 - Page 96

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL

FUNCTIONAL CHECKS
4–32
REV 5
4–3–3 Utility Menu (Continued)
(J) SYSTEM ID ENTRY/DISPLAY (Continued)
Procedure for Setting New System ID
1. Type 1 and then press the Return key. The system ID number entry menu is displayed on the CRT monitor
screen as shown in ILLUSTRATION 4–24.
2. Type any 5–digit number within the limits of 00000 to 16383 and press the Return key. The new system ID
number is set.
Procedure for Displaying Current System ID
1. Type 2 and then press the Return key. The current system ID number is displayed on the CRT monitor screen
as shown in ILLUSTRATION 4–24.
2. Type Y and then press the Return key to continue this function. Press and hold the Control key and press R to
exit this function.