9-32 MAC™ 1600 2028451-182B
System Configuration
Basic Setup
Resting Setup
Arrhythmia Setup
Stress Setup
Communication Setup
Country Setup
Patient Setup
User Setup
Options Setup
Complete Setup
3. When you are done, press F6 (Return) to return to the Main Menu.
Select Setup
The Select Setup utility allows you to save up to five system
configurations and switch between them. This is useful if the device is
shared by departments or used in multiple clinical trials.
Use the following instructions to save and load configuration files.
1. From the Main Menu, press F5 (System Configuration) > F6 (More) >
F6 (More) > F1 (Select Setup).
The Select Setup window opens. The name of the setup currently
being used by the system appears in the Loaded Setup field.
2. To save a copy of the current setup, do the following:
a. Press F3 (Save As).
The Setup Name window opens.
b. Type a name for the configuration and press F6 (Save).
The configuration is saved, and the Setup Name window closes.
3. To load a different setup, do the following:
a. Select the setup to load.
b. Press F1 (Load Setup).
c. Reboot the unit.
The unit must be powered off and on for all setup changes to take
effect, especially if the new setup includes a change to the
language setting: language will not change until the unit reboots.
4. To delete a setup file, do the following:
a. Select the file to delete.
b. Press F2 (Delete).
You are prompted to confirm the deletion.
To Next Page
Loading...
