GE MAC 1600

Maintenance
2028451-182B MAC™ 1600 10-9
Adjusting the Paper Tray for Paper Size
The MAC 1600 thermal writer supports two paper sizes: U.S. Letter
(8.5” x 11”) and A4. When the device ships, the paper tray is configured
to use the appropriate paper size for the destination location. Use the
following instructions to change the paper size by moving the spacers in
the paper tray.
1. Press down on the paper tray release button and pull up on the roller
holder.
013A
2. Pull the paper tray until it stops.
3. Press and hold the release button on the bottom of the device and
pull the paper tray to remove it completely from the device.
014A
4. Adjust the placement of the paper spacers for the paper size you will
be using.
Refer to the following illustrations.