System Configuration
2028451-182B MAC™ 1600 9-23
Country Setup
The Country Setup function allows you to define:
System language
Date and time formats
Measurement units
Line filter
Lead label
To reach the Country Setup from the MAC 1600 Main Menu, press F5
(System Configuration) > F6 (More) > F2 (Country Setup).
The following table identifies the settings on Country Setup.
Obtain DNS service
address automatically
(DHCP)
Determines whether the MAC 1600 device will
automatically obtain a DNS (Domain Name Server) IP
address. If this field is checked, the following two fields are
display-only. If this field is cleared, you must define the IP
address of the DNS servers to use.
Primary DNS Server Identifies the IP address of the primary DNS server used to
resolve Internet domain names.
Alternate DNS Server Identifies the IP address of the secondary DNS server
used to resolve Internet domain names.
Field Comment
Field Comments
Language Determines the language used by the interface and
reports.
Date Format Determines the format in which dates are displayed.
Options are:
DD.MM.YYYY
MM/DD/YYYY
YYYY-MM-DD
Time Format Determines whether the system will use a 12-hour or a
24-hour format.
Height/Weight Unit Determines whether the system will use metric
measurements (cm, kg) or English measurements (in, lbs)
for patient weight and height.
Speed Unit Determines whether the speed of stress devices will be
measured in kilometers per hour (km/h) or miles per hour
(mph).
To Next Page
Loading...
Need help?
General
