GE MAC 1600

System Configuration
2028451-182B MAC™ 1600 9-33
c. Press F6 (OK).
NOTE
You cannot delete a configuration that is currently loaded.
5. To change the name of a system setup file, do the following:
a. Select the setup file to change.
b. Press F4 (Edit Name).
The Setup Name window opens.
c. Type the new name and press F6 (Save).
6. To remove all custom settings, do the following:
a. Select the setup file to reset.
b. Press F5 (Factory Defaults).
c. When prompted to confirm, press F6 (Save).
7. When you are done, press F6 (Return) to exit.
Export Setup
The Export Setup utility allows you to export saved settings from the
MAC 1600 system to an SD card. This SD card can then be used to
import the settings to another MAC 1600 system, greatly simplifying the
installation and configuration of multiple MAC 1600 systems.
1. Insert the SD card.
2. From the Main Menu, press F5 (System Configuration) > F6 (More) >
F6 (More) > F3 (Export Setup).
The Select Setup for Export window opens. All saved settings on the
device are listed in the left hand column. All saved settings on the SD
card are listed in the right hand column.
3. In the left hand pane, select the setup file to be exported.
4. Press F1 (Export).
The selected file is copied to the SD card and appears in the right
hand column.
5. Repeat step 3 through step 4 for each saved configuration file to be
exported.
6. When you are done, press F6 (Return).