Stress Testing
2028451-182B MAC™ 1600 7-3
The results of the test cannot be stored to internal storage or the external
SD card. Instead, the results must be printed. You can select any of the
following report formats.
Summary Report
Tabular Summary
Trend Report
ST Trend Report
ST Summary Report
Episode Report
To use the Stress ECG mode, the following conditions must be met:
The ERGO option must be purchased and added to the unit.
For more information, refer to “Options Setup” on page 9-29.
The correct device must be selected on the Basic System Setup.
For more information, refer to “Basic Setup” on page 9-2.
The Stress ECG Setup must be configured correctly.
For more information, refer to “Stress ECG Settings” on page 9-13.
Stress Mode Interface
The Stress ECG mode uses two special features—a Stress Test
Information Bar and Stress Test Keys—and offers several configuration
options.
Stress Test Information Bar
The Stress ECG mode adds an information bar on the right side of the
MAC 1600 display, as seen in the following illustration. Descriptions of
the bar’s key elements follow the illustration.
To Next Page
Loading...
Need help?
General
