Maintenance
2028451-182B MAC™ 1600 10-5
Disinfectant to Use
In accordance with the APIC Guidelines for Selection and Use of
Disinfectants (1996), use sodium hypochlorite (5.2% household bleach) to
disinfect the cables and leadwires.
Sodium hypochlorite can be in the form of a liquid or a wipe as long as it
falls within the following range:
Minimum dilution of 1:500 (minimum of 100 ppm free chlorine)
Maximum dilution of 1:10
Cleaning Materials To Avoid
DO NOT use the following materials to clean the cables or leadwires:
Sani-Cloth® Wipes
Ascepti® Wipes
HB Quat®
Clorox® Wipes
Over-the-counter detergents (Fantastic®, Tilex®, etc.).
Conductive solutions
Solutions or products that contain any of the following:
Abrasive cleaners or solvents
Acetone
Alcohol-based cleaning agents
Ammonium Chloride
Betadine
Chlorides, wax, or wax compounds
Ketone
Sodium salts
Use of these materials or materials that contain similar active
ingredients and solutions could result in:
Product discoloration,
Metal part corrosion,
Brittle wires and connectors,
Reduced product life,
Unit malfunction, and
Void warranty.
Cautions
Observe the following cautions when cleaning cables and leadwires:
Never immerse cables or leadwires in any liquid.
Never pour or spray any liquid directly onto cables or leadwires
Never permit fluid to seep into connections or openings.
To Next Page
Loading...
