Chapter 8 - Replacement Procedures 8-121
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
• Two between the connectors and the MPB receptacle side.
17.)Close the cable cover door:
• Slide the cable cover door towards the system, and fix the rubber grommet in its position
• Close the captive screw of the cable cover door using a Phillips screwdriver.
18.)Install the arm side cover.
19.)Secure side cover with two securing screws.
20.)Install the arm base cover.
Figure 8-114 Plastic Clips Holding the Cable
Figure 8-115 Closing Cable Cover Door
To Next Page
Loading...
