8-132 Section 8-6 - Mechanical Parts- Replacement Procedures
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
eTower, and RS Probe cover.
17.)Install the rear cockpit cable cover if exists.
18.)Connect the Wi-Fi dongle if exists.
19.)Install all accessories.
20.)Turn ON power to the system.
• Riser Thermal Cover Installation Procedure
• Left Side eTower Cover Installation Procedure
• Right Side eTower Cover Installation Procedure
• Lower Front eTower Cover Installation Procedure
• RS Probe Cover Installation Procedure
• Wi-Fi Adapter Installation Procedure (For Systems with No Existing Wi-Fi Adapter)
• Accessories - Replacement Procedures
Perform the checks listed in Articulated Arm Replacement Procedure on page 8-218
To Next Page
Loading...
