8-152 Section 8-6 - Mechanical Parts- Replacement Procedures
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
• SATA PWR cable
• SATA DATA (BE to SSD) cable
• MiTx to BIB cable: release one connector on the BIB and pull upwards two connectors on the
BEP PCB
8-7-10-5 BEP Cables Installation Procedure
1.) Reconnect the cable(s) that was/were removed:
• USB split cable
• HDMI cable
• Network cable
• SATA PWR cable
Figure 8-156 Remove PCB
Figure 8-157 MiTx to BiB Cable Removal
To Next Page
Loading...
