D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
3-32 Section 3-6 - Configuration
PRELIMINARY
9.) On the Connectivity tab, enable the required settings in the Connectivity items list, by moving the
On/Off sliders to On. Then, select each Connectivity item to define its properties. Tap Apply and
then Save.Then, proceed to the next tab.
10.)On the OptionKey tab, enter the key string to enable the purchased options and tap Save. Then,
proceed to the next tab.
Figure 3-34 Venue™ Installation Wizard - Connectivity Tab
Figure 3-35 Venue™ Installation Wizard - OptionKey Tab
To Next Page
Loading...
