Chapter 8 - Replacement Procedures 8-203
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
19.)Scan the UDI code with GE UDI Scanner application and make sure the CRM system is updated
correctly. see Figure 8-246
NOTE: This step is applicable only for upgrades that were obtained electronically (eDelivery).
20.)In case the purchased upgrade kit was delivered as a physical media, scan the UDI label that is
attached to the installation media. Refer to Figure 8-247 as reference only. always use the actual
label.
Figure 8-246 Venue™ Upgrade UDI Label
To Next Page
Loading...
